Installation and operation
14 / 24
221205
EN
Drain Tap Installation
To facilitate transportation of the appliance, the drain tap is
installed at the internal side of the housing.
1. Undo the drain tap.
2. Screw it to the external side of the housing.
Fig. 5
Flame Protection Filters Installation
1. Unpack the delivered flame protection filters and, if needed, partitions.
Flame protection filters are fitted in a specially formed fat collection element. The
internal profile of the extractor hood is formed in a way making it possible for
condensate/fat to accumulate in the fat collection channel and are delivered to the
drain tap.
2. After installing the extractor hood on the
wall, fit the appliance with flame
protection filters and partitions (if
needed):
– use the holders to fit the flame
protection filters in the top guide-rail of
the available opening first, then move
them upwards as far as possible and let
them slide to the bottom guide-rail.
– fit the partition between flame protection
filters.
Fig. 6
Summary of Contents for 1100-WD2000
Page 1: ...1100 WD2000 221205...