- 26 -
Digital temperature regulator
Display and functions
Primary temperature settings are established at the factory and correspond to a working
temperature in the device of approx. 0 °C - 10 °C.
During normal use, the display will show the temperature as measured by the sensor.
The LED will also show the current state of functions (table 1), and by using the 3 buttons
some functions can be activated/deactivated (table 2).
Tab. 1
LED
Function
Normal working mode
Start
ON
OFF
Flashing
①
Compressor On
Off
Needed
ON
②
Ventilator
On
Off
Needed
ON
③
Defrost
On
Off
Needed
ON
④
Aux
Device is on
Device is off
-
ON
⑤
Time
RTC function
is available
and/or active
and set for at
least 1 time
period
RTC function is
not available or
turned off, or no
time period has
been set
-
ON, if the
RTC
function
is
available
⑥
Alarm
All
No alarm
-
ON
⑦
Digital
display
Composed of 3 lighted values with comma/period and
range of -199…999. See parameters /4, /5, /6 for the
display of values detected by sensor, values in °C/ °F and
after the comma/period
Summary of Contents for 110.709
Page 1: ...110 709 110 710 V2 0712 ...
