Bartscher 107.000, Instruction Manual, Page: 32 / 92

- 32 -
Control parameter settings
•
The set point can be selected directly by pressing the key and can be adjusted
by pressing the
or
keys at the same time.
•
The selected operation mode is indicated by the
or
displays being lit. The
operation mode can be switched by pressing the key, where cooling is only
enabled when the temperature of the combination plate drops to 80 °C.
•
If the appliance is switched off when the temperature exceeds 40°C, the actual
temperature and OFF indicators flash alternately in the digital display.
ATTENTION!
Changes to the preset parameters should be performed only by customer service
personnel.
WARNING! Burning hazard during operation!
The residual heat display shows whether the combination plate is still hot.
The temperature display flashes as long as the combination plate is still hot
after switching off heating (above 40°C).
Do not touch the combination plate and do not put any heat-sensitive objects on it.
In case of a power interruption the flashing signal disappears even if the
combination plate is still hot.
•
Do not put food directly on the surface. All food, whether hot or cold, should be put
on the surface of the combination plate in appropriate containers. Use only suitable
tableware. Do not use tableware made of plastics.
•
Do not use pots or pans with a bottom with sharp edges or which are not
enamelled properly. They can cause permanent scratches.