- 30 -
•
Ensure that the cookware used will not scratch the surface of the heating plate,
although this should not negatively affect the unit’s functioning.
•
When cooking or heating is finished, remove the plug from its socket (do not
rely solely on the sensory function)!
Blocking mechanism
The unit is equipped with two blocking mechanisms
(for each heating plate).
The mechanism may be activated after setting the function mode (power level or
temperature), to place the functions in memory. The control light above this button will
come on and indicate that no other buttons will initiate functions.
To deactivate the mechanism, press the same button again for 2 seconds, until the control
light goes off. All buttons will now become functional again.
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
The device should be cleaned regularly.
o
Wipe off the cooking zone with a damp cloth or use a mild, non-abrasive soap
solution.
o
Wipe off the operating panel with a soft cloth or a mild detergent.
o
Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o
After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o
Make sure the device has been cleaned and dried properly for further usage.
