![Barton 95528 Owner'S Manual And Safety Instructions Download Page 4](http://html1.mh-extra.com/html/barton/95528/95528_owners-manual-and-safety-instructions_3985277004.webp)
3
IMPORTANT SAFETY INFORMATION
The LP tank used with your appliance must meet the following requirements: Purchase LP tanks only
with these required measurements: 12” (30.5cm) (diameter) x 18” (45.7cm) (tall) with 20 lb. (9 kg.)
capacity maximum. Be constructed and marked in accordance with specifications for LP tank of the U.S.
Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, Cylinders,
Spheres and Tubes for the Transportation of Dangerous Goods. The propane cylinder used with this
appliance must include a collar to protect the cylinder valve.
LP tank valve must have: Type 1 outlet compatible with regulator or appliance. Safety relief valve. • UL
listed Overfill Protection Device (OPD). This OPD safety feature is identified by a unique triangular hand
wheel. Use only tanks equipped with this type of valve. LP tank must be arranged for vapor withdrawal.
LP gas is non-toxic, odorless and colorless when produced. For Your Safety, LP gas has been given an
odor (similar to rotten cabbage) so that it can be smelled.
LP gas is highly flammable and may ignite unexpectedly when mixed with air.
Leak test must be repeated each time LP tank is exchanged or refilled.
DO NOT
smoke during leak test.
DO NOT
use an open flame to check for gas leaks.
Appliance must be leak checked outdoors in well-ventilated area, away from ignition sources such as gas
fired or electrical appliances. During leak test, keep appliance away from open flames or sparks.
Use a clean paintbrush and 50/50 soap and water solution. Use mild soap and water.
DO NOT
use
household cleaning agents. Damage to gas train components can result. Brush soapy solution onto all
weld seams and entire valve area.
SAVE THESE WARNINGS
NEVER
use a stove of any kind to heat your home.
NEVER
attempt to move the fryer while it is lit. Turn off and disconnect propane prior to moving. Failure
to do so may cause a leak in the connections and could easily cause a fire or explosion with future use.
DISCONTINUE USE IF THERE IS ANY SIGNS OF DAMAGE OR WEARING THAT MAY BE UNSAFE,
Including but not limited to wearing on the regulator or hose, wearing or damage to plate support, damage
or loose wheels/base.
PRODUCT INFORMATION