5
Remove the back panel from the heater first. See Fig 2
Drill holes with a #6 drill bit.
Fig. 2
Remove the two pieces of white screws on both sides on the heater. See Fig 3
Fix the wall bracket using the plug and 6x25mm screws provided.
Carefully lift up the heater ensuring the top rear ledge of the heater engages with the wall bracket (see
Fig. 4) and is sitting centrally. This process should be carried out by two people.
Put the crystal up to the white border then gently bring the heater down against the wall.
Fig. 3
Fig. 4
ASSEMBLY
