Barton 94131 Owner'S Manual And Safety Instructions Download Page 6

PARTS LIST

5

6

• Young children should be carefully supervised when they are in the area of the appliance at all times.

• Children should never operate this unit. Children must be supervised while near this unit.

• Clothing or other flammable materials should not be hung from the appliance, or placed on or near the appliance.

• Any guard or other protective device removed for servicing the appliance must be replaced prior to operating the appliance.

Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at 

least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative that the 

control compartment,burners and circulating air passageways of the appliance be kept clean.

• Installation and repair should be done by a qualified service person.Appliance should be inspected before use and inspected 

and cleaned by a qualified service person regularly.

• Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and 

any gas control which has been under water.

• Use only the specific size and capacity of the cylinder noted.

• A statement that the LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications 

for LP- gas

cylinders of the U.S. Department of Transportation (DOT).

• This appliance shall be used only outdoors in a well-ventilated space and shall not be used in a building, garage or any other 

enclosed area as the instructions state.

• Installation and repair should be done.

• How to disconnect a gas bottle?

Turn OFF control knob and LP cylinder valve.Turn coupling nut counterclockwise by hand only - do not use tools to disconnect. 

Loosen cylinder screw beneath bottom shelf, then lift LP cylinder up and out of shelf. Place dust cap on cylinder valve outlet 

whenever the cylinder is not in use.

• Storage of an appliance indoors is permissible only if the cylinder is disconnected and removed from the appliance. Cylinder 

must be stored outdoors in a well-ventilated area out of reach of children. Disconnected cylinders must have threaded valve 

plugs tightly installed and must not be stored in a building, garage or any other enclosed area.

WARNING

: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. 

Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a 

qualified installer, service agency or the gas supplier.

• The LP-gas supply cylinder must be disconnected when this appliance is not in use

• Only cylinder marked “propane” shall be used.

Caution

: Only use the pressure regulator and hose assembly supplied with this fire bowl. Replacement pressure regulator 

and hose assemblies must be specified. Inspect the hose before each use of the appliance. If the hose shows signs of cracks, 

abrasions, cuts or damage of any kind, do not operate the

appliance. Fix or replace the hose as required before using the appliance. Use only replacement parts from the manufacturer.

Allow heating item to cool completely before placing on lid. DO NOT use heating item/cover while the lid is installed. Always 

remove the lid while heating item in use. 

SAVE THESE WARNINGS.

Summary of Contents for 94131












Reviews: