1
2
3
4
www.barton-tools.com
5
6
Warning
：
1.
Do not hammer or knock any part of the tool. Before operation, check whether any damage, aging, missing parts, inaccurate
adjustment or parts stuck or any other adverse factors that may endanger safety and normal operation . Ensure that the switch can
operate effectively without any stuck phenomenon. If any problems are found, discontinue use immediately until the problem resolved.
2.
The limit block and screw on the clamp head are to prevent the clamp head from falling off or popping out. Do not remove it by
yourself!
3.
Remove any grease and dust, especially from handles and control components, to prevent sliding off during use.
4.
Built-in safety valve after strict pressure test before leaving the factory, users must not adjust without authorization! If the pressure is
insufficient, please hand the tool to the maintenance personnel and pass the pressure test before using
5.
Do not crimp when there is no mold in the jaw of the working pliers. Otherwise,the tools may be damaged and personal injury
Warning
：
In the process of extending the piston, do not put fingers or any part of human body into the jaw of the
working pliers to avoid accidents
