1. Option 1: Plug the mic connector into a mic cable that is connected to
a mixer mic input. That input should supply phantom power.
2. Option 2: Plug the mic connector into a mic cable that is connected to
a phantom power supply. Then connect the phantom supply output to a
mixer mic input.
3. Turn on phantom power before use.
4. The microphone is very sensitive or “hot”. Be sure to turn down the
input gain trim on your mixer as needed to prevent mixer distortion and
feedback.
5. If you also use a pickup, mix the Bass Mic with the pickup to get a
variety of tones.
WARRANTY
SERVICE
The Bartlett Bass Mic is guaranteed not to malfunction (except in cases
of abuse) for a period of two years from the date of first purchase. Mic
cables and paint finish are excluded from this warranty.
For tech support email [email protected].
If the microphone does not operate correctly, first check its cable and
other connected cables. Repair or replace them if necessary. Make sure
that phantom power is turned on and that the microphone’s fader is up in
the mixer.
If the microphone still fails to operate, obtain a return authorization
number from us by emailing [email protected]. Then return the mic
and its cable in its original packaging to Bartlett Audio. Please include
proof of purchase and a note about the problem.
If the microphone’s specifications change, any changes will appear in
the latest data sheet available online at www.bartlettaudio.com.
OPERATION
1. Supplied with the Bass Mic is a foam mount about 1 inch behind the
mic.
2. Stuff the foam mount in an f-hole with the mic just inside the f-hole.
MOUNTING THE BASS MIC ON YOUR INSTRUMENT
4-5-14
Press foam
mount into
f-hole
Mic is just
inside f-hole
Mic cable
