NOTES
CONTACT
Josef Barthelme GmbH & Co. KG
Oedenberger Str. 149
90491 Nuremberg | Germany
T: +49 911 42 476 0
E: [email protected]
www.barthelme.de
SUBJECT TO TECHNICAL
CHANGES.
VERSION 02|2016
8. CONTENTS AND ACCESSORIES
Connect LEDs and power supply as shown
in fig. 2 and 3. Make sure that LED-stripes
and correct power supply are connected
to CHROMOFLEX Pro KNX CV.
IMPORTANT NOTE:
For programming you need the newest
version of ETS software. Needed files for
the ETS software can be found at our web-
page
www.barthelme.de.
Additionally you can find the explanation of
all parameters and group objects on this
webpage.
7.1 START-UP
Connect LEDs and power supply as per
your application. Make sure that LED-stri-
pes and correct power supply are connec-
ted to CHROMOFLEX Pro KNX CV.
For programming you need the newest
version of ETS software. Needed files for
the ETS software can be found at our web-
page www.barthelme.de.
Additionally you can find the explanation
of all parameters and group objects on
this webpage.
