2. Delivery / Scope of delivery
After receipt of the goods please check whether the delivery is complete and whether the items are intact.
The delivery consists of one reel AQUALUC including a connection cable.
3. Area of application
Examples for applications of the AQUALUC:
• accent illumination
• illumination for outdoor, wellness, spa and pool areas
• architectural illumination
• backlight for illumination of letters
• shipbuilding
• exhibition lighting
• stairway illumination
• illumination for bars, and many more
4. Technical data [extract]
5. Installation and commissioning
5.1 Installation and processing guidelines
• The
processing temperature
range of the AQUALUC is between 15°C and 35°C. Temperatures below
this can negatively influence the flexibility of the stripe and can result in damage. If the AQUALUC was
previously exposed to lower or higher temperatures, then it must be
slowly
brought into the processing
temperature range.
• Please note that the AQUALUC can marginally expand or contract with
changes in temperature
at the
installation location. This is not a defect in the product but a normal physical process. Specifically, this
means that there is a linear thermal
expansion
of approx. 1 mm per meter and 15 °C change in tempe-
rature. This extra expansion gap should always be taken into consideration prior to installation.
• To avoid damaging the AQUALUC, especially during
unrolling
or
mounting
, it is important that
two people
install the product. This is especially valid for a length of one meter (1 m) or more. Care should be taken
that the product does not sag otherwise irrevocable damage can occur (see illustration 1). Furthermore,
the encapsulation of the product may not be damaged otherwise a sufficient protection of the LED stripe
cannot be ensured.
It is important to never exceed the minimum bending radius!
• The
minimum bending radius
of the AQUALUC is 5 cm (ATTENTION: the minimum bending radius for
AQUALUC 25 HP is 9 cm!). The minimum bending radius may not be exceeded and the stripe may not be
bent, otherwise the AQUALUC could be damaged (see illustration 2).
• The product is suitable for
installation
on the floor, wall or ceiling - indoors and outdoors. Make sure that the
product is mounted on a clean, flat and stable surface.
• Depending on the surface and the application, the installation can be performed with the
retaining bracket
(Art. 40100100), with thermal conductive double-sided
adhesive tape
(Art. 30033009) or with
construction
adhesive
(Art. 63500030).
Detailed technical information can be found in the relevant data sheet at
www.barthelme.de
AQUALUC
14
AQUALUC
25
AQUALUC
25 HP
AQUALUC
33
24 V DC
operating voltage
Outdoor IP67/68
protection class
24 W | 12 W
26 W | 13 W
64 W
48 W | 24 W
typical power
2,700 K | 3,200 K | 4,600 K | 6,500 K 3,500 K | 4,400 K | 6,400 K | 9,000 K
RGB
colour temperatures
14 mm
25 mm
25 mm
33 mm
LED pitch
13.5 x 6 mm
dimensions
width x height
