5. PAIRING OF DEVICES
1. PAIRING A GLASS TOUCH DEVICE
AND A REMOTE CONTROL
1. While in On-mode you should press and hold
the power button of the Glass Touch until the
blue status LEDs begin to blink.
2. Immediately thereafter you must press and
hold the power button of the remote control
until the status LEDs of the Glass Touch stop
blinking.
2. REMOVING PAIRING OF TWO DEVICES:
Press and hold both arrow buttons for approxi-
mately 3 seconds until the status LEDs flash a
few times. This means that the pairing has been
discontinued.
SAVE
SAVE
