Vanguard wiring
harness KB-951
MANUAL
Seite/von:
Dokument:
Stand:
Revison:
3/4
9021-0107-A
02.06.2023
A
B. Connect X2:2 to the negative battery terminal. Use
hardware supplied with your battery. Torque to battery
specifications.
C. Connect X7:1 to positve terminal of load. Follow the
recommendations of the load manufacturer.
D. Connect X7:2 to negative terminal of load. Follow the
recommendations of the load manufacturer.
E. Connect X5:1 to posive terminal of the charger. Use
hardware supplied with your battery. Torque to charger
specifications.
F. Connect X5:2 to negative terminal of the charger. Use
hardware supplied with your battery. Torque to charger
specifications.
© 2023 BARTH Elektronik GmbH | Im Depot 1-3 | D-49838 Lengerich | www.barth-elektronik.de | [email protected]
® BARTH and lococube are registered trademarks of BARTH Elektronik GmbH. All rights reserved to make changes without prior notice.
