Bartell CONTEC KAESER R2D2, Owner'S Manual And Parts Book

Page: 10 / 24

R2D2 Dust Collector
OWNER’S MANUAL AND PARTS BOOK
9
OIPB
– C15006
OPERATION INSTRUCTIONS
SETTING UP YOUR CT320 PLANER
Your R2D2 Dust Collector comes fully assembled. You will only need to attach the
necessary power cables and hoses.
PRIOR TO OPERATION
•
Make sure that all dust, debris etc., are thoroughly removed from the unit prior to
operation.
•
Check hoses and power cables for damage and replace or fix as necessary.
•
Check all bolts and screws for tightness and make sure all bolts and screws are securely
tightened. Loose bolts and screws may cause damage to the unit.
CONNECTING THE POWER CABLES
•
Connect the power cable from the power unit of the R2D2 to the electrical connection box
included with the R2D2
•
Connect the machines power cord to the female 63a connection of the electrical
connection box
•
Connect the supply power cable to the male 63a connection of the electrical connection
box
OPERATION
Operating
After attaching the hoses and power cables, operation may begin.
Press the start button on the control panel. If the indicator light on the panel does not want to
stay on after releasing the button, then that means the compressor motor wants to start in the
wrong direction. In this case there is a switch with the star and delta symbols on it. Turn the
switch to the star position, the motor will begin to turn. Wait 10 seconds and turn the switch to
the delta position.
It is important to wait until the motor is not increasing speed before you
switch over from the “star” to the “delta” position
.
The dust bin of the R2D2 must be emptied during the operation of the machine. How often it
needs to be emptied is dependent on the amount of dust produced during operation.
The R2D2 only removes dry dust or material. Wet or greasy dust will block or damage filter
cartridges.
Stopping Procedure
Turn off the machine (Scarifier, Grinder etc.) connected to the Dust Collector, then switch off
the dust collector.
ATTENTION: Before working on the Dust Collectorr bring the motor to a total stand
still and disconnect from the power supply.
CAUTION : Motors and cables can be hot after use.