SAFETY WARNINGS
PERSONAL SAFETY
Warning
：
Read and understand instructions before operating saw
！
•
Always wear
safety approved
hearing
eye
head
and
respiratory
protection.
•
Sturdy boots
with nonslip soles
aid
in
providing
proper footing.
Use
of
steel-toed
safety
boots are recommended
.
Under certain
conditions
sparks
may fly
so
never wear clothes of flammable
material.
•
Know how to stop saw
quickly
in case of
emergency.
Keep all parts of your
body
away
from
blade
and all other moving parts.
•
Use caution and follow
instructions
when loading
and
unloading saw.
BLADE SAFETY
Exam
ine
cutting
blades before each
use.
Blade
should have no crack snicks
or flaws.
Center hole should
be
undam
aged.
Use only
the blades recommended
for
your model.
Th
i
s saw should cut
only materia
l
that is specified
on each
cutting blade.
Read the
instructions which
are
on
each blade to determine
which mater
ial
the
blade is
designed to cut.
Use only reinforced
abrasive blades
or steel centered diamond blades
manufactured
for use onconcrete saws.
Inspect
blade flanges for
damage excessive wear and
cleanliness
before mounting
b
l
ade. Blade
should
fit
snugly on clean undamaged shaft.
Use only blades marked
with
a
maximum
operating speed greater than the blade shaft
speed.
•
The
ignition
governor
is
designed to limit the maximum engine speed in a
no-load condition. Speeds in excess of that may cause the
blade
to exceed the
maximum safe-
allowable speed.
Do not operate
the unit
if you
suspect
it
of
exceeding this speed
•
Always
keep guards
in
place and
do
not allow blade
exposure
on the guard to
exceed 180 degrees.
Avoid getting
into
direct line with the
b
l
ade
.
•
Make
sure t
h
e blade does not
make contact
with th
e ground
or any o
t
her
surface when transporting
the
saw
.
Use
only
dry
cutting diamond blades
with
the optiona
l
water tank kit
as
the water source
for dust
suppression. Do
not use
conve
ntiona
l
abrasive blades
wit
h
water.
STREET SAW INSTRUCTION MANUAL
375 ANNAGEM BLVD., MISSISSAUGA, ONTARIO, CANADA L5T 3A7, 905-364-4200 FAX 905-364-4201
2
All manuals and user guides at all-guides.com
