background image

WALK-BEHIND TROWEL INSTRUCTION MANUAL

 

BARTELL MORRISON INC.

  

375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-458-5455 FAX 905-458-5484 

Created: 07/04 

Revised: 08/09 

 

- 8 - 

Routine Service Intervals 

 

Due to the nature and environment of use, Walk-Behind Power Trowels could be exposed to severe 
operating conditions.  Some general maintenance guidelines will extend the useful life of your trowel.  

 

  The  initial  service  for  your  power  trowel  should  be  performed  after  25  hours  of  use,  at  which  time  your 

mechanic  (or  authorized  repair  shop)  should  complete  all  of  the  recommended  checks  in  the  schedule 
above.  The chart on page 6 (six) is handy for keeping a record of the maintenance performed and the parts 
used for servicing your trowel. 

  Regular service according to the schedule above will prolong the life of the Walk-Behind Power Trowel and 

prevent expensive repairs. 

  Keeping  your  Walk-Behind  Power  Trowel  clean  and  free  from  debris  is  the  single  most  important  regular 

maintenance  operation,  over  and  above  the  checks  in  the  service  schedule  above,  that  can  be  performed. 
After each use your Walk-Behind Power Trowel should be cleaned to remove any dust and debris from the 
undercarriage  and  surrounding  components.    Use  of  a  power  washer  will  make  clean  up  quick  and  easy, 
especially if a non-stick coating was applied prior to use. 

  In  the  Service  Schedule  above,  items  that  should  be  checked,  replaced  or  adjusted  are  indicated  by  “o”  in 

the appropriate column.  Not all Walk-Behind  Power  Trowel models include the  same features and options 
and as such not all service operations may have to be performed.  For ease of recording place a checkmark 
(

)  through  the  “o”  when  the  item  is  complete.    If  an  item  is  not  required  or  not  completed  place  an  “x” 

through the “o” in the box. 

  All  Walk-Behind  Power  Trowels  have  governed  engine  speed  of  3600  rpm.    See  engine  manufacturer’s 

manual  for  exact  specifications.    Care  should  be  used  when  making  any  adjustments  to  the  Walk-Behind 
Power Trowel not to change the governed speed. 

  Failure  to  have  your Walk-Behind  Power  Trowel  regularly  serviced  and  properly  maintained  in  accordance 

with the manufacturer’s instructions will lead to premature failure and void the warranty. 

Summary of Contents for B430
















































Reviews:

Related manuals for B430