DFG280
Operating Manual
V1.05
5
SAFETY
Only trained operatives should be allowed to work the DFG280 floor grinder.
All operatives should wear ear defenders, goggles and an effective dust mask. Note: It is
possible that the noise level produced by the DFG280 could exceed 90dbA. Personal noise
protection must be worn and the equipment must be used in line with guidelines laid down
by the Health & Safety Executive.
Never leave the DFG280 unattended whilst in use. Always stop the motor prior to leaving
the machine.
Keep the electric lead away from the grinding head.
Always use the correct voltage for the machine and RCD protection.
Always ensure that all power leads are disconnected before attempting to service the
machine. The service of electrical components should be carried out by authorised
personnel. Never tip the machine completely backwards until the grinding plates have
stopped rotating, just raise slightly.
Vibration will occur at various levels dependent on the attachments and work being
completed. It is recommended that tests are taken on site to provide the operator with
accurate information on using the equipment within the guidelines laid down by the Health &
Safety Executive.
Never operate the machine without a dust skirt.
NOTE:
NEVER OPERATE THE COMPACT FLOOR GRINDER IN WET CONDITIONS AS
ELECTRICAL COMPONENTS ARE NOT WATERPROOF
