![background image](http://html1.mh-extra.com/html/bartell-global/bss18h39w/bss18h39w_owners-manual_3963732008.webp)
CONCRETE SAW
OI
– B19041
OWNER’S MANUAL
7
Blade Safety
Use appropriate reinforced abrasive blades or steel centered diamond blades manufactured for
use on concrete saws. Do not use conventional abrasive blades with water.
Always inspect diamond blades before each use. The blade should exhibit no cracks, damage,
or flaws in the steel centered core and/or rim. Center (arbor) hole must be. Examine blade
flanges for damage, excessive wear and cleanliness before mounting blade. Blade should fit
tightly on the shaft and against the inside/outside blade flanges.
Ensure that the blade is marked with an operating speed greater than the blade shaft speed of
the saw.
Only cut the material that is specified by the diamond blade. Read the specifications of the
diamond blade to ensure the proper tool has been matched to the material being cut. Use only
dry cutting diamond blades with the optional water tank kit for dust suppression.
Always keep blade guards in place. Exposure of the diamond blade must not exceed 180
degrees.
Ensure that the diamond blade does not come into contact with ground or surface during
transportation. Do not drop the diamond blade on ground or surface.
The engine governor is designed to permit maximum engine speed in a no-load condition.
Speeds that exceed this limit may cause the diamond blade to exceed the maximum safe
allowable speed.
Ensure that the blade is mounted for proper operating direction.
Transportation Safety
Use the lifting bail and appropriate lifting equipment to ensure the safe movement of the saw.
Do not use the handle bars and/or front pointer as lifting points.
Never tow the saw behind a vehicle.
Ensure that both pointer bars are positioned appropriately to minimize their exposure during
transportation.
Engines tipped to extreme angles may cause oil to flow into the cylinder head making the
engine difficult to start.
Summary of Contents for BSS18H39W
Page 15: ...CONCRETE SAW OI B19041 OWNER S MANUAL 14...
Page 16: ......