Bartec Tech200BT, User Manual

Page: 22 / 44

Tech200BT User Guide rev3.0 April 2014
6.0 TPMS RELEARN TYPES:
•
Stationary Relearns
• Active (Drive) Relearns
• OBD Relearns
6.1 Stationary Relearns:
Stationary Relearns use the vehicle’s on-board TPMS system to listen for
transmissions from TPM sensors while the vehicle is in a “Learn Mode”. This is
usually achieved through a series of functions on the vehicle to place the
vehicle into this mode.
Once the vehicle is in Learn Mode, using your Tech 200 to activate the sensors,
the vehicle will listen for the sensor IDS and learn them to the vehicle.
Using your Tech 200 to perform Stationary Relearns:
o
Set the tool up by Make, Model and Year.
o
Follow the instructions provided (refer to Bartec’s tool
website, TIA Look-up Chart or TPMSHUB.com) to place
the vehicle into learn mode.
o
Using the Tech 200, active the TPM sensors.
6.2 Active (Drive) Relearns:
Active or Drive Relearns
Some vehicles can be reset by driving. Refer to Bartec tools website, TIA Look-
up Chart or TPMSHUB.com.
22