background image

 

Important Notices 
 
SAFETY DEFINITIONS 

 

All DangerWarningImportant, and Note messages must be followed for your safety. These safety messages 

are in the following formats: 

 

DANGER: Means you may risk possible loss of life. 
 

WARNING: Means you may risk possible bodily harm. 
 

CAUTION: Means you risk damage to the vehicle or the tool. 

 

These safety messages cover situations SPX is aware of. SPX cannot know, evaluate and advise you as to all the 

possible hazards. You must be certain that any conditions or service procedures encountered do not jeopardize your 

personal safety. 
 

COPYRIGHT 

 

No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, 
electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SPX. 

 

DISCLAIMER 

 

All information, illustrations, and specifications contained in this technical instruction manual are based on the latest 

information available at the time of publication. The right is reserved to make changes at any time without obligation 

to notify any person or organization of such revisions or changes. Further, SPX shall not be liable for errors contained 

with the furnishing, performance or use of this material. 

 

 

 

 

 

CONTENTS 

 
 

Important Notices 

 

Inside Front Cover 

 

Safety 

Precautions 

   5 

 

Kit 

Components 

    8 

 

Powering the TECH200 ON and OFF 

 

 

Navigating the TECH200 Menu   

 

 

Using the TECH200  

 

 

 

 

Updating the TECH200 firmware  

  

12 

 

TECH200 Technical Specification  

 

13 

 

SPX Corporation Limited Warranty 

 

13 

 

 
 

 

 

3

Summary of Contents for Tech200










Reviews: