Ex p Control unit
SILAS
pz
Product description
Rev. 0
A1-37S2-7D0001_pz_Manual_Exp-Control-Unit_20210923_0_en.docx
Page 19 of 88
Programming switch
The programming switch must be connected to the control unit
in order to change parameters and switching values.
The control unit SILAS does not accept values, which are
changed without an active connected programming switch.
Programming cable
The programming cable is used to connect the Ex p control unit
to the PC. This must be connected to the control unit and PC in
order to change parameters and switching values.
