Appendix A
Additional Description
MC 9090
ex
Mobile Computer
RFID
Page 2 of 22
Technical data subject to change without notice.
Issue 08/2010
2
2
Safety Instructions
MC 9090
ex
mobile computer types 17-A119-R ** 6/H *******, type 17-A119-R ** 7 *******
with external RFID/UHF antenna may not be used in processes that generate high
charge levels.
High charge levels can occur in particular with electrostatic painting, pneumatically
conveyed dust, flowing liquids and droplets, mechanically driven belts, brushes and foils
etc.
2.2
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
2.2.1
Radio Frequency Interference Requirements - FCC
Note
: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
¨
Reorient or relocate the receiving antenna.
¨
Increase the separation between the equipment and receiver.
¨
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
¨
Consult the dealer or an experienced radio/tv technician for help.
2.1
Warnings about the Mobile Computers
