Commissioning
Mobile Computer
MC 75Ax
ex
-NI and MC 75A6
ex
HF-NI
Type B7-A27.-…………
32/58
Subject to technical changes.
04/2015
5.4.8
Insert SAM card (MC 75A6
ex
HF-NI only)
The provider’s documentation has further information on SAM cards.
ATTENTION
Damage to the SD card through electrostatic discharges!
Use an antistatic base.
Ensure that the operator is correctly earthed.
Work steps
1.
Only insert the SAM card outside the potentially explosive atmosphere.
2.
Only use SAM cards which have been specified by ZEBRA for this purpose.
3.
Press the red “ON/OFF” button to switch off the Mobile Computer.
4.
Remove the four screws of the cover plate/RFID antenna antenna using a torx (T5)
screwdriver.
5.
Lift RFID anmtenna from the reverse side of the enclosure and remove.
6.
Open the cover of the SAM card.
7.
Insert the SAM card into the opening with the contacts facing down.
8.
Close the cover of the SAM card.
9.
Click-in the RFID antenna on the reverse side of the enclosure.
10.
Tighten the four screws using a torx (T5) screwdriver.
11.
Perform a warm boot.
Summary of Contents for MC 75Axex-NI
