Safety precautions
2
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
2
Safety precautions
2.1
General safety instructions
The equipment operator is responsible for complying with all regulations ap-
plicable to storage, transport and handling.
For safe installation and commissioning, the knowledge of the safety instruc-
tions and warnings in this service manual and their strict compliance are es-
sential.
Careful handling and consistent adherence to instructions can help to prevent
accidents, injuries and property damage.
All regulations and provisions shall remain in full force when operating the
equipment with MAK units.
The units were built in compliance with the applicable regulations and left the
factory in perfect condition. The units must be installed and serviced by duly
skilled and qualified personnel.
● Make sure that the information and operating conditions specified by the
manufacturer are observed.
● Follow the instructions on operating and servicing the units.
● If you notice any damage or deterioration on parts of the equipment, or if
safe operation cannot be guaranteed for other reasons, do not start up the
equipment or - if it is already running - switch it off immediately.
Notify your service centre.
● You should also contact our service technicians if you notice malfunctions
or defects during operation or if you have any doubts as to whether the
units are working properly.
● The MAK units are not a replacement for the safety installations on the milk
tanker or for the safety systems put in place by the customer.
