MAK 3003_LYNX_V.2.35_KBA 151021
Page 20 of 21
5. The System is now ready to start the CIP process. The valves will start to alternate
after flow is detected. Depending on the pump type of your system there may be
additional warnings/information displayed before or after the CIP starts.
During the CIP process the system will alternate the state of the valves to ensure that the
normal intake path (including sampler tubes) and the ventilation path will be passed by the
CIP fluids.
6. After the CIP process has stopped you can press FINISH. This will open all valves
and display a message to drain the system.