Bartec Agile X, Update Manual, Page: 2 / 4

B1-A23
4-7N0
003
Rev
.A– Vers
io
n: 2
2 May
201
9
Update Guide
Create a Bootable Installation USB Flash Drive
for Agile X and Agile X IS
EN
GmbH
Max-Eyth-Straße 16
97980 Bad Mergentheim
GERMANY Phone: +49 7931 597-0
Fax:
+49 7931 597-119
info@bartec.de
www.bartec.de
Disclaimer We reserve the right to make technical changes.
Changes, errors and misprints shall not justify
any claim for damages.
2/4

Press “Ok” button in the next message to continue the
process

When the formatting process is complete, the message
"Formatting was successful" (Format Complete)
appears.

Press the “Ok” button to close this message. The
Format partition window closes automatically.
Creating a bootable USB flash drive

Insert an USB flash drive into a running computer

Start the 32-bit or 64-bit BootIce’s version depending on
the system you are running

Make sure that the USB flash drive is selected as the
destination in the “Destination Disk” area. If not, select
the right USB flash drive from the drop-down list

Press “Activate” button to mark the partition as active