Bartec 17-21BA-M31S Series, User Manual

Page: 34 / 56

Commissioning
Barcode Hand Scanner
BCS 160
ex
Series, Types 17-21BA-M31S/…….. and 17-21BA-M32S/……..
28/48
Technical data subject to change without notice.
Revision A / Status: 01/2014
5.4.2 BCS 160
ex
BT and Ex Base Station with power pack RS232/RS422 or USB
RS232/422 connection cable 4-pin plug Ex power pack
RJ45 pin
assignment
Wire
colour Signal
Pin assignment
Designation
Terminal
Terminal
6 White TxD 3 RxD X9
NC - shield 4
GND X10
PE X11
4 Brown GND 2 GND X12
7 Yellow +UB 1 +UB X13
USB connection cable 4-pin plug Ex power pack
RJ45 pin
assignment
Wire
colour
Signal Pin assignment
Designation
Terminal
Terminal
2 Green D+ 3 D+ X9
10 White D- 2 D- X10
4 Black GND 4
PE X11
GND X12
7 Brown +UB 1 +UB X13
5.4.3 BCS 160
ex
BT and Non-Ex Base Station
DANGER
Usage for purposes other than those for which it was intended will endanger
explosion protection. There is a risk of a fatal injury in an explosive atmosphere!

The non-Ex base station may be operated only outside the hazardous area!

Disconnect from voltage before doing any connection or wiring work!
For more information, please also refer to the Programming Manual from Sick.
5.5 Handling the Accessories
DANGER
Non-certified accessories will endanger explosion protection.
There is a risk of a fatal injury in an explosive atmosphere!

Use only original accessories from BARTEC.
Use only outside the hazardous area:

Replace the battery.
For more information, see the documentation from Sick.