6
7
CONTROL PANEL
VOLUME/POWER Switch
Rotate volume control away from OFF to power on the detector.
PHONE Jack
You can insert the headphones’ plug of 3.5mm into the PHONE jack and operate
without trouble. At this time the internal speaker is disconnected.
LCD Display
Control Buttons
MENU
Press MENU, LCD will display LIGHT, SENS, DISC, NOTCH. One of the displayed
items will flash. If no button is pressed in about 5 seconds, the flashing item will be
selected.
SENS
Press MENU to select SENS and wait for about 5 seconds until the display stops
flashing. Then, press + or – to adjust the level of sensitivity. The level will be
displayed on the LCD.
DISC
Discriminates the unwanted target by setting the numeric range. Press MENU to
select DISC and wait until flash stops. Then, press + or – to adjust the numeric range
(00-80) of discrimination. The number will be displayed on the LCD.
Note: 25¢ cannot be ignore, it is made by valuable material.
NOTCH
Eliminates the target you don’t want. Press MENU to select NOTCH. Then, press
+ or – to select the target to be notched. The cursor above the selected target will
flash. Press NOTCH again, and the target name below the cursor will disappear. If
you want to un-NOTCH, press NOTCH again.
PP
Pinpoints the location of the target accurately.
LIGHT
Press MENU to select LIGHT. Then, press + or – to adjust the level (0-9 ) of LIGHT.
The level will be displayed on the LCD.
Note: As the backlight consumes more power, it’s better to turn off it in light places.
OPERATION
1. TURNING ON THE DETECTOR
Rotate volume control away from OFF to power on the detector. After about 2
seconds, the detector enters into stand-by state. At this time the factory default
mode is DISC. LCD displays DISC of 00 and SENS of 6 bars.
2. TESTING AND USING THE DETECTOR
To learn how the detector reacts to different metals, you should test it before you
use it at first time. You can test the detector indoors and outdoors.
Headphone
Menu
Pinpoint
Notch
Power / Volume
Low Batt
Indicator
Menu Content
Sens / Signal
Indicator
Disc / Notch
Indicator
Target
Indicator
Target
Numeric
Indicator
Disc
Numeric
Indicator
Background Light
Adjust brightness by
pressing MENU