6
7
Control Panel
LCD Display
PHONE
Insert the headphones’ plug of 3.5mm into the
PHONE jack for private listening.
VOLUME/POWER
Adjusts the volume level and turns on or off the unit.
Control Buttons
NOTCH
Press NOTCH, then + or – to select the target to be
notched. The cursor above the selected target will
flash. Press NOTCH again, the target name below
the cursor will disappear.
DISC numeric range (0-80)
Press DISC then + or – to select the desired DISC
number. If the target material is beyond the DISC
range, it can’t be discriminated.
Note: The highest DISC numeric setting is 80. If you
set the DISC number to 80, all targets less than this
number will not be detected.
SENS
Press SENS then + or – to increase or decrease
the sensitivity. LCD will display the current setting
of sensitivity. If the target depth is beyond the max.
sensitivity of the detector, the target will not be found.
Operation
Power On
Turn the VOLUME switch clockwise to power on the metal detector. LCD will display
all symbols. Meanwhile the detector sounds low, medium, high tones respectively.
After about 2 seconds the detector enters into stand-by state. At this time the default
mode is DISC. LCD displays DISC of 00 and SENS of 6 bars.
Testing and Using the Detector
To learn how the detector reacts to different metals, you should test it before you use
it the first time. You can test the detector indoors and outdoors.
Indoor Testing and Use
1. Turn the VOLUME switch clockwise to power on the metal detector.
2. Setting the operating mode:
(1) DISC: Press DISC, then + or – to set the DISC numeric value. If the DISC value
is set to 00, the detector can detect all metals. If you want to find one of the target
material listed on the LCD, you can set the relative numeric range of DISC by
pressing DISC then + or -. For example, the numeric range for 5¢ is 6-17, you can
simply press DISC, then set the DISC number to 7 or 10 by pr or -. If the
detector finds a coin of 5¢, the cursor above 5¢ will light.
Note:
1. It is recommended to select the lower or medium value of the numeric range.
Because if you select a top value, you might miss the target below the
selected value.
PHONE
VOLUME
/ POWER
CONTROL BUTTONS
DISC Numeric
Indicator
Low BATT Indicator
Target Numeric
Indicator
SENS/DEPTH
Indicator
DISC / NOTCH
Indicator
Target
Indicator