OPENING AND CLOSING SAFE WITH PIN CODE
WARNING: Safe will lock user out for 15 minutes after 3
consecutive incorrect password attempts. Leave
Batteries in the safe and wait 15 min for safe functions to
return. Batteries MUST REMAIN in safe.
Open
1. On the key pad enter in either of the registered Pin
Codes and press and release “ # ” to confirm.
2. Turn the handle to the unlocked position and pull safe
door open.
Close
Close the safe door and turn the handle to the locked position.
LOW BATTERY WARNING
If a quick red light flashes while accessing and using the safe, this
indicates that the batteries are low, please replace battery as soon
as possible.
MOUNTING INSTRUCTIONS
- Be aware of the load bearing. Failure to do so can result in
personal injury and/or damage to property.
- Barska recommends that this safe be anchored to the wall.
- Your safe must be shimmed level to assure proper lock functions
and to keep the door from swinging open too quickly or closing
by itself.
- To avoid rust on the safe, never set the safe directly on a cement
floor. We recommend a spacer be placed between the safe and
the cement.
- Exposure to chemicals or other adverse environments may cause
the warranty to become invalid.
- The safe is designed to support itself when the doors is
opened. However caution should be used to avoid pulling it
over. To maximize security and stability, bolting the safe to the
floor is recommended.
- Measure the location of the pre-set drill holes; mark their
exact position onto the wall
- This safe comes with 2 pre drill holes measuring 3/8” Diameter,
located at the back of the safe. You will need to drill the mounting
screws through the interior carpet.
- Use proper drill tools depending on the type of surface you are
mounting the safe (wood, tile, or concrete)
Safe
BC325
5/19
1 YEAR LIMITED WARRANTY
BARSKA warrants this new safe to be free of original defects
in material and/or workmanship under normal use for a
period of twelve (12) months from the date product is
received by purchaser. This warranty does not include
damage caused by improper installation or maintenance.
Damage from misuse, abuse, accident (such as dropping),
normal wear and tear, fire, flood, or acts of nature. Damage
from service or repairs other than those performed by
BARSKA. Labor, cost and shipping charges for the removal
and replacement of defective parts beyond the initial
twelve-month warranty period. All transportation and shipping
charges. Removing or altering the seal under any
circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not
transferable. This warranty applies only to products
purchased in the United States.
Please email [email protected] or call 1.888.666.6769 for
Return Merchandise Number (RMA#) before any returns. The
RMA number must appear on the outside of the shipping
package. Product must be packed carefully and sturdily in its
original packaging to prevent damage in transit and returned
freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA
products for service and/or replacement:
1. Please write your complete details (Name, Address,
Telephone #, E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $90.00 to cover inspection,
shipping and handling.
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or
replace defective part(s) or units with new part(s) or a new
unit if necessary within the warranty period. Purchaser is
required to remit $90.00 to BARSKA for return shipping and
handling at time product is returned. If repair is required after
warranty period expiration, purchaser will be charged for
replacement parts and return shipping.
BARSKA® Optics shall not be liable for any consequential,
incidental and/or contingent damages whatsoever. We will
not pay shipping, insurance or transportation charges from
you to us, or any import fees, duties and or taxes. This
warranty supersedes all previous BARSKA®
Optics warranties.
- Drill the appropriate size holes for the anchors you are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the safe and
securing to anchors; ensure the safe is mounted securely.
CARE AND MAINTENANCE
-
Your safe is built to last. However, please understand that the
locking mechanism has some precisions parts. If you
experience ANY difficult opening or closing your safe, DO
NOT FORCE THE HANDLE, call 888.666.6769 for technical
support. If the handle is forced or ABUSED, it may jam the
components in the lock, which will require a safe technician
to unlock your safe. This causes an inconvenience for both
the owner and Barska and may lead to claim denials.
- Keep liquids away from the keypad. Spills on the keypad will
cause damage and possibly electric shock.
- If necessary use a damp cloth to clean the safe. DO NOT use
chemicals or cleaning agents.
- Secure safe in a proper area to prevent it from falling and
causing damage or injury.
- The mechanism inside the door and the hinges are
permanently lubricated, this needing no maintenance.
Occasionally it may be necessary to lubricate the door bolts.
To do so, extend the door bolts completely with the door
open. Wipe a small amount of oil around each bolt.
- DO NOT over stuff the contents of the safe, it can damage
the motor mechanism or the contents.
- DO NOT disassemble the product. For all repairs and
maintenance, contact BARSKA Customer Service
888.666.6769 for technical support.
