© 2014 BARSKA®
855 Towne Center Drive Pomona, CA 91767
(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
BARSKA warrants this new lock box to be free of original defects in
material and/or workmanship under normal use for a period of twelve
(12) months from the date product is received by purchaser. This
warranty does not include damage caused by improper installation or
maintenance. Damage from misuse, abuse, accident (such as
dropping), normal wear and tear, fire, flood, or acts of nature. Damage
from service or repairs other than those performed by BARSKA.
Labor, cost and shipping charges for the removal and replacement of
defective parts beyond the initial twelve-month warranty period. All
transportation and shipping charges. Removing or altering the seal
under any circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not transferable.
This warranty applies only to products purchased in the United States.
Please email [email protected] or call 1.888.666.6769 for Return
Merchandise Number (RMA#) before any returns. The RMA number
must appear on the outside of the shipping package. Product must be
packed carefully and sturdily in its original packaging to prevent
damage in transit and returned freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA products
for service and/or replacement:
1. Please write your complete details (Name, Address, Telephone #,
E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $20.00 to cover inspection, shipping
and handling.
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or replace
defective part(s) or units with new part(s) or a new unit if necessary
within the warranty period. Purchaser is required to remit $20.00 to
BARSKA for return shipping and handling at time product is returned.
If repair is required after warranty period expiration, purchaser will be
charged for replacement parts and return shipping.
BARSKA® Optics shall not be liable for any consequential, incidental
and/or contingent damages whatsoever. We will not pay shipping,
insurance or transportation charges from you to us, or any import
fees, duties and or taxes. This warranty supersedes all previous
BARSKA® Optics warranties.
COMPACT LOCK BOX
1 YEAR LIMITED WARRANTY
Replacement Keys: When calling for replacement or additional
access keys have the access key code number ready. The access
key code is etched in the key entry AND on the access keys.
DELETING ALL FINGERPRINTS continued
9. All fingerprints stored in the lock box have been deleted.
10. The lock box is in demo mode, ANY fingerprint can open
the lock box
INSTALLING THE CABLE
Included with the lock box is a steel cable that may be attached to
any stationary item for increased security. The cable hole is
located on the side of the lock box.
Installing the Cable
1. Locate the stationary item
you would like the safe to be
attached to and wrap the
cable around the
stationary item
2. Thread one end of the cable
through the other loop of the
cable. The loop that was just
created in this step should be
wrapped around the
stationary item
3. Open lock box by using the
personal pin code or
access key
4. Locate the cable slot
5. Place the unused loop of the steel cable with the with the
metal stopper portion in the lock box through the cable slot
6. Close lock box and ensure that the lock box is locked
7. Slightly tug on the cable to ensure that the cable is securely
attached to the lock box
Removing the Cable
1. Open lock box by using a registered fingerprint or access key
2. Lift steel cable out of the cable slot
3. Pull the one end of the cable through the other loop of
the cable
4. Store cable in a safe place
MOUNTING
The lock box may be mounted to a wall or to the floor. The three
pre-drilled mounting holes are located under the lock box and can
be exposed by gently removing the rubber pads out of it’s place.
NOTE On Wall Mounting:
When mounting to a wall, be aware of the load bearing to
ensure safety of lock box and contents. Failure to do so could result
in the lock box falling and damaging property and/or people.
When mounting to a wall check the wall or cabinet for structural
soundness
1. Check location for concealed items such as wires, pipes etc
2. Get the appropriate anchors for the type of floor or wall you
will be mounting the lock box to (wood, tile, concrete etc)
3. Mark the surface to drill holes for the anchors you will
be using
4. Drill the appropriate size hole for the anchors you will
be using
5. Once mounted, test the strength to make sure the lock box is
securely mounted
CARE AND MAINTENANCE
- For security purposes wipe fingerprint off scanner when
opening and/or closing the lock box
- If necessary use a damp cloth to clean the lock box. DO NOT use
chemicals or cleaning agents
- Keep liquids away from the control panel. Spills on the control
panel will cause damage and possibly electric shock
- Secure lock box in a proper area to prevent it from falling and
causing damage or injury
- DO NOT over stuff the contents of the lock box, it can damage the
motor mechanism or the contents
- DO NOT disassemble the product. For all repairs and
maintenance, contact authorized service centers or distributor
BARSKA Customer Service
-
DO NOT place emergency keys inside of lock box
BC300
9/14
User Manual For Portable
Biometric Compact Lock Box
DO NOT mount lock box without anchoring to the wall behind
the lock box!
