BARSKA warrants this new safe to be free of original defects in
material and/or workmanship under normal use for a period of twelve
(12) months from the date product is received by purchaser. This
warranty does not include damage caused by improper installation or
maintenance. Damage from misuse, abuse, accident (such as
dropping), normal wear and tear, fire, flood, or acts of nature. Damage
from service or repairs other than those performed by BARSKA.
Labor, cost and shipping charges for the removal and replacement of
defective parts beyond the initial twelve-month warranty period. All
transportation and shipping charges. Removing or altering the seal
under any circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not transferable.
This warranty applies only to products purchased in the United States.
Please email [email protected] or call 1.888.666.6769 for Return
Merchandise Number (RMA#) before any returns. The RMA number
must appear on the outside of the shipping package. Product must be
packed carefully and sturdily in its original packaging to prevent
damage in transit and returned freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA products
for service and/or replacement:
1. Please write your complete details (Name, Address, Telephone #,
E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $20.00 to cover inspection, shipping and
handling.
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or replace
defective part(s) or units with new part(s) or a new unit if necessary
within the warranty period. Purchaser is required to remit $20.00 to
BARSKA for return shipping and handling at time product is returned.
If repair is required after warranty period expiration, purchaser will be
charged for replacement parts and return shipping.
BARSKA® Optics shall not be liable for any consequential, incidental
and/or contingent damages whatsoever. We will not pay shipping,
insurance or transportation charges from you to us, or any import
fees, duties and or taxes. This warranty supersedes all previous
BARSKA® Optics warranties.
COMPACT SAFE
1 YEAR LIMITED WARRANTY
Replacement Keys: When calling for replacement or additional
access keys have the access key code number ready. The access
key code is etched in the key entry AND on the access keys.
CHANGING PERSONAL PIN CODES
Open safe by entering either of the personal pin codes or by
using the access key
Changing 1st Personal Pin Code
1. Press and release the reset button. You will hear 1 beep and
indicator light will be consistently green
2. Enter in your 3 - 8 digit personal pin code on the key pad
3. Press and release the reset button
Successful Save
- You will hear 1 short and 1 long beep and green light flash
Unsuccessful Save
- You will hear a consistent beeping sound and red light
flashes 3 times
- Repeat steps 1 - 3
Changing 2nd Personal Pin Code
1. With safe lid open, press and release the reset button, wait 2
seconds and press and release the reset button again. You
will hear 2 beeps and indicator light will be consistently green
2. Follow steps 2-3 above
INSTALLING THE CABLE
Included with the safe is a steel cable that may be attached to
any stationary item for increased security. The cable hole is
located on the side of the safe.
Installing the Cable
1. Locate the stationary item you would
like the safe to be attached to and wrap
the cable around the stationary item
2. Thread one end of the cable through
the other loop of the cable. The loop
that was just created in this step should
be wrapped around the stationary item
3. Open safe by using the personal pin code or access key
4. Locate the cable slot
5. Place the unused loop of the steel cable with the with the
metal stopper portion in the safe through the cable slot
6. Close safe and ensure that the safe is locked
7. Slightly tug on the cable to ensure that the cable is securely
attached to the safe
Removing the Cable
1. Open safe by using the personal pin codes or access key
2. Lift steel cable out of the cable slot
3. Pull the one end of the cable through the other loop of
the cable
4. Store cable in a safe place
MOUNTING
The safe may be mounted to a wall or to the floor. The three
pre-drilled mounting holes are located under the safe and can be
exposed by gently removing the rubber pads out of it¹s place.
NOTE On Wall Mounting:
When mounting to a wall, be aware of the load bearing to ensure
safety of safe and contents. Failure to do so could result in the
safe falling and damaging property and/or people.
DO NOT mount safe without anchoring to the wall behind
the safe!
When mounting to a wall check the wall or cabinet for structural
soundness
1. Check location for concealed items such as wires, pipes etc
2. Get the appropriate anchors for the type of floor or wall you will
be mounting the safe to (wood, tile, concrete etc)
3. Mark the surface to drill holes for the anchors you will be using
4. Drill the appropriate size hole for the anchors you will be using
5. Once mounted, test the strength to make sure the safe is
securely mounted
CARE AND MAINTENANCE
- If necessary use a damp cloth to clean the safe. DO NOT use
chemicals or cleaning agents
- Keep liquids away from the control panel. Spills on the control
panel will cause damage and possibly electric shock
- Secure safe in a proper area to prevent it from falling and
causing damage or injury
- For security purposes, change the factory default code as
soon as possible
- DO NOT over stuff the contents of the safe, it can damage the
motor mechanism or the contents
- DO NOT disassemble the product. For all repairs and
maintenance, contact authorized service centers or distributor
BARSKA Customer Service
- DO NOT place emergency keys inside of safe
User Manual For
Digital Keypad Compact Safe
©2013 BARSKA® | Pomona, CA 91767, USA
(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
