Barry-Wehmiller Thiele Technologies Streamfeeder Reliant..., Manual

Page: 29 / 72

23
R
elaint
1500 M
anual
Figure 23. Adjusting Back Wedge for Proper Lift
STEP 3:
Back Wedge Setting
(continued)
Start with
about 5/8"
(16 mm) lift
Figure 24. Adjusting Back Wedge for Parallel Figure 25. Evenly Adjusting Individual Wedges
Back
wedge
parallel
to stack
x
x
=
5. Make sure the edge of the back wedge assembly is paral -
lel with the edge of the material stack (Figure 24). Adjust as
required and then tighten knob.
6. Check that individual triangle wedges are evenly spaced to
provide enough support to lift the material off the table top
and feed belts, without any bowing or twisting (Figure 25).
Refer back to page 20 for guidelines on adjusting individual
wedges for thinner material.