Barrus Shire 65, Original Instruction, Page: 60 / 88

RDG603A31- Issue 4
Page 60 of 88
5. Cylinder Head Tightening Sequence
Figure 25: Cylinder Head Tightening Sequence

Tighten all the cylinder head bolts to 30Nm following the sequence shown in Figure
25 .

Tighten all the cylinder head bolts to 50Nm following the sequence shown in Figure
25 .

Put a paint mark on each bolt as reference point.

Turn all the cylinder head bolts 60° clockwise following the sequence shown in Figure
25 .

Turn all the cylinder head bolts a further 60° clockwise following the sequence shown
in Figure 25 .
The bolts can only be reused a MAXIMUM of two times