RDG603A17 – Issue 1 – Shire 30_40_50 WB/RB Manual
Page 30 of 51
Figure 8: PRM150 Gearbox
Figure 9: PRM260 Gearbox
5. Disposal of Oil and Related Items
•
Please dispose of used oil and oil filters safely with due regard for the environment
and take to your local waste oil disposal point.
•
Do not allow oil or contaminated parts to enter the inland water way system.
6. Primary Fuel Filter Drain – Shire 30, 40 & 50
•
Place a small drain bowl under the primary fuel filter / water trap.
•
Loosen the drain screw located in the bottom of the fuel filter / water trap (
Figure 10
)
•
Drain off any water.
•
Once the water has been drained, retighten the drain screw.
•
It is unlikely the complete fuel system will require bleeding.
•
Run for 5 minutes.
•
Check that the drain union is tight and that there are no leaks.
•
Do not over tighten the drain screw.
Note: The boat builder should have fitted an additional water trap in the fuel system.
Ensure that this is drained regularly.
Level dipstick / Filler Plug
Level dipstick / Filler Plug
