NFT Series
Installation Instructions
10070187 REV 4 - 07/19
2
800-533-3948 www.barronltg.com
Wall/Ceiling Mount - Back Power Feed
1. Insert a flat blade screwdriver into the two slots to remove front cover
from backplate. (Fig 1).
2. Remove knockout from center of backplate and route wires through the
hole.
3. Remove appropriate knockouts on backplate and mount to junction box.
4. Connect the fixture wires to the power supply wires using the wire nuts
provided. Connections should be made inside junction box. Connect the
white wire to neutral and black wire to the hot lead. Refer to
Wiring
Diagram
section.
5. Connect remote lamp wires if fixture is remote capable. Refer to
Remote
Lamp Connection
section
.
6. Connect battery to PCB.
7. Snap the front cover on the backplate.
8. Restore power and then test fixture by pressing test button. LED heads
will turn on.
9. Adjust the direction of lamp heads for optimal lighting coverage.
Wall Mount - Top Power Feed
1. Insert a flat blade screwdriver into the two slots to remove front cover
from backplate.
2. Remove top knockout on the top flange of fixture for the flexible conduit
access hole.
3. Secure flexible conduit to access hole and route wires through conduit
to junction box. (Fig. 3)
4. Remove appropriate knockouts from backplate and mount to wall.
5. Connect the fixture wires to the power supply wires using the wire nuts
provided. Connections should be made inside junction box.
Connect the white wire to neutral and black wire to the hot lead.
Refer to
Wiring Diagram
section.
6. Connect remote lamp wires if fixture is remote capable.
Refer to
Remote Lamp Connection
section.
7. Connect battery to PCB.
8. Snap the front cover on the backplate.
9. Restore power and then test fixture by pressing test button.
LED heads will turn on.
10. Adjust the direction of lamp heads for optimal lighting coverage.
Open Fixture
Use Screwdriver
to Pry Open
Mounting
Screws
Backplate
Battery
Connector
Front
Cover
Wall Mount - Back Power Feed
Fig. 2
Fig. 1
Wall Mount - Top Power Feed
Fig. 3
Flexible
Conduit
Junction Box
Wire Nuts
Mounting
Screws
