Catch the Light Combo
Instruction Manual
8
For assistance call: 1+(716) 866-0054
Assembly – Step
2
(Assemble the Table)
6.
Install the legs. Notice that one of the legs is
different; there is an eyelet on the side. This leg goes
on the side with the cord, the eyelet acts as a guide
once the table is assembled.
7.
To secure the bolt: place an expanded pad, a
spring pad, then a nut. When tightening the
nut, make sure that all the other holes on the
leg are aligned with the holes on the table.
8.
At this point, only use one mounting point per leg
until the table is upright.
9.
When all 4 nuts (one per leg) are tightly
secured, flip the table back to the correct
standing position.
10.
Open the machine and insert the additional screws
(two more on each leg) from under the table.
11.
Place an expanded pad, a spring pad, and then
the nut. Proceed to tighten all 12 mounting
points (4 bolts from Step 7 and 8 from Step 10)
