Double Shot Basketball
Instruction Manual
39
For assistance call:
1+(716) 866-0054
Test the proximity sensor:
If sensor is working properly, the display will show two lines (close
gate) and one line (open gate). If not, then the sensor is out of service.
Follow along with this video:
http://bit.ly/2aD6CAz
1)
Hold the test button in and turn the power on
2)
Release the test button and wait for the display to count to 10
3)
Press the test button two times, the display should say “output test”
4)
Press the versus button once, wait for the diagnostic to raise and lower the gate
5)
Press the versus button twice, wait for the diagnostic to raise and lower the gate
Troubleshooting Hardware
Hardware Test:
(When in standby, press
TEST KEY
[left side] to enter
TEST MODE
)
Display Test:
1. Single Play Button will take you back to the game.
2. Press Service Button (left side) for two seconds to enter internal settings.
Input Test (DIP SW, KEY, & Sensor):
1.
Single Play Button:
Test Red/Orange rope light
2.
Two Play Button:
Blue/Green rope light
Output Test:
1.
Single Play Button:
Test Hoop
2.
Two Play Button:
Test Gate
3.
Service Button:
Test Ticket Dispenser
Sound Test:
1.
Single Play Button:
Next Sound
2.
Two Play Button:
Replay
3.
Service Button:
Add Background Sound
4.
Account Button:
Next Background Sound
Default Factory Reset – Clear All to Defaults
When powered on, press the ACCOUNT button and SERVICE buttons at the same
time; all data will be cleared.
Default Settings:
1.
3 Points per Goal for the last 10 seconds
2.
Stages Score:
1st = 30 points
2nd = 150 points
3rd = 250 points
4th = 350 points
5th = 450 points
3.
Highest Score:
150 points
