World Tour Foosball Table
Instruction Manual
Page 16
For assistance call: +
1-716-866-0054
Assembly – Step
C
(Secure the Players to the Rods)
After Assembling the Players
1. After putting the rods inside of the
table, reinstall the tempered glass
carefully and retighten all the bolts.
Then, attach the 4 cup holders with hex
bolts to each end (2 per short side).
2. Open the table and put ONE ball in
the track. Also, put the PCB COVER
above the PC Board.
3. Using the included
allen key, secure
each cup holder to
the short ends of
the table. There are
2 cup holders per
table end (4 total).
4. Plug in the electrical cord and turn on the power (under the table on the right side) to
ensure all lights, motors, and computer functions are operable.
IMPORTANT NOTE:
Only 1 ball may be inside the machine at a time
.
Please check to see if your machine was shipped with a ball inside the machine before inserting
another ball.
The machine will not function if more than one ball is inside the mechanism.
