STEP 1 //
Unplug the factory license plate light harnesses,
and the trailer plug connector and pull away from the bumper.
If equipped unplug and remove the factory backup sensors.
STEP 2 //
Push the red tab outwards, and press the black
tab to unplug the license plate light harness. Unplug both
sides.
STEP 3 //
From underneath the vehicle, locate and remove
the (2) 21mm bolts from the upper frame rail mount. Do the
same on the opposite side. **Note: Factory hardware will be
reused.
STEP 4
//
From under the vehicle, remove the (2) 21mm
bolts from the lower frame rail mount. Do the same on the
opposite side. Carefully remove the bumper from the vehicle.
**Note: Factory hardware will be reused.
R110299
R110300
Tubular Rear Bumper
(09-18 RAM)
TOOLS REQUIRED:
15, 16, 18, 21mm Sockets
3/8” or 1/2” Ratchet & Extensions
10mm Wrench
Trim Panel Removal Tool
Flat Head Screw Driver
Allen Wrench
CONTENTS:
(1) Rear Bumper
(2) Bumper Brackets
(2) Mesh Grille Inserts
(2) Fog Lights
- Optional
(1) Fog Light Harness
- Optional
(2) Bolt Plates
(4) M12x1.75x40mm Bolts
(4) M12 Flat Washers
(4) M12 Lock Washers
(4) Rear Camera Rubber Plugs
(2) LED License Plate Lights
(4) Splice Connectors
(10) Zip Ties
