HORIZONTAL CONFIGURATION
Installation Instruction
1. Unpack the antenna (see unpacking instructions) and lay it out on the ground between two
mounting poles with the load element and balun wires below the antenna wires. (as shown
in picture below)
2. Attach rope to each insulator (one at each end) and slowly hoist between the two mounting
points (tower/poles even a tree or to the roof) ensuring the wires do not tangle. Raise to
about eye level.
3. Balun (black box) connection: Once the antenna has been raised to a convenient height,
attach the balun and coax cable as shown below. All stainless steel nuts and washers
required are provided with the balun. RG 213 coax cable strain relief is provided, where
appropriate, by a pigtail strain reliever (PTS) attached to the rear of the balun.
4. Raise the antenna to the desired height and secure ropes. A slight curve in the antenna is
normal.
Load Group
Load Terminal
Load Group
BARRETT
912 Multiwire broadband dipole antenna - 1Kw (54M/27M)
P/N BC91203/BC91207
BCM91203/4