#0-313A-SBA (6/01)
Page 15 of 14 pages
BARRETT CENTRIFUGALS INC.
1-800-228-6442
Check that when the lever is in the closed position the lever site hole is aligned properly with
the sensor tip and solenoid pin. If not, adjust the latch stop position by turning the stop
adjusting screw.
Be sure to replace and securely fasten the sheet metal guard and enclosure cover
when complete.
BEARINGS
The bearings in this machine are for centrifugal application having special internal fits and
should be purchased from Barrett.
REPAIR PARTS
Repair parts are available from:
Barrett Centrifugals Inc.
156 Goddard Memorial Drive
Worcester, MA 01603
Telephone: 800-228-6442 or 508-754-6891
Fax: 508-756-5342
E-mail:
Web Site: Barrettinc.com
Be sure to specify the serial number of the machine, found either on the control panel
nameplate and / or stamped on the machine base, when ordering parts.
