Introduction
The Rapid Deployment Tuned
Dipole Antenna
frequency labels to indicate
Wire
has
tuned lengths. For operation, each side of the antenna is unwound to the tuned
length for the frequency required. he label should be level with the end of the
T
winder as shown in the picture below. Lengths for intermediate frequencies
should be estimated and tied off appropriately. The remaining wire remains on the
winder. The throwing cord can then be used to elevate the antenna. The antenna
will operate continuously across the band from 2-30
z. The power rating is 150
MH
W
.
can be used in a number of congurations
, depending on
PEP It
(see over)
structures available for elevation. Compatible Barrett masts include, 10m Rapid
Deployment Mast (P/N 2090-02-21), 10m Rapid Deployment Composite Mast (P/N
2090-02-24) and 5m Rapid Deployment Mast (P/N
2090-02-04). This antenna is most suitable for HF
radio manpack and temporary base station
deployment. This guide will indicate the
recommended deployment type for each
conguration
symbols.
with these
BARRETT RAPID DEPLOYMENT TUNABLE WIRE DIPOLE HF ANTENNA
Frequency label
e.g. 16 Mhz
selected
Winder
Throwing cord
Manpack
Temporary
base station
