Mounting the Whip Sections
To mount the whip section it is recommended that only one section of the whip is
screwed onto the antenna at a time. The whip section should be hand tightened fully
then a suitable tool (ie: a spanner) can be used to tighten the section a further 10 to 20
degrees clockwise while holding the antenna body with a free hand.
To mount 2 whip sections together the unattached whip section should be hand
tightened fully then a suitable tool (ie: a spanner) can be used to tighten the section a
further 10 to 20 degrees clockwise while holding the already screwed on whip section
with a free hand.