622GT Owner’s/Operator’s Manual
8/29/18
Page 4 of 16
HOUR METER
The
DGI
®
TACH/HOUR
hour meter tracks the hours of machine operation in order for routine
maintenance to be performed on a timely basis.
Your
DGI
® hour meter is pre-set at the
DGI
® factory to go into
Flash Alert
mode at 25-hour intervals.
Although the engine manufacturer does not require changing engine oil this often,
due to heavy-duty use
and extreme conditions inherent to tiller use, Barreto Manufacturing strongly recommends
frequent oil changes.
Refer to this manual for equipment service requirements and to the
Engine Manual
for engine service
requirements.
While
Flash Alert
is active, hold the tip of the RESET TOOL (Key Kancel Wand) against the meter as
shown. Within several seconds, the display will stop flashing indicating the Service Interval has been
reset. If the wand gets lost, a small mechanic’s pick-up magnet will work.
RESET TOOL
