background image

712MT OWNER’S MANUAL                  REVISED   3/4/22                               Page 1 of 15 

                                                        THE 

                MODEL 712MT 

                             HYDRAULIC MICRO TRENCHER 
                                         OWNER’S MANUAL 

 

 
 
CONGRATULATIONS! 
 
You are now the proud owner of a BARRETO trencher. The OPERATOR’S MANUAL is attached 
to the machine. Please study both this manual and the operator’s manual to become familiar with the 
trencher, its characteristics and its method of operation. Pay particular attention to the safety and 
operating instructions to prevent personal injury or equipment damage.   
 
If you have any questions or need any replacement parts in the future, please contact us at your 
convenience. Our toll-free phone number, fax and email are listed below. 
 
Thank you for your patronage and confidence in BARRETO equipment. 
 
Barreto Manufacturing, Inc. 
Innovative Equipment Engineered to Last 
66498 Highway 203 
La Grande, OR  97850 
1-800-525-7348 
1-541-963-6755 Fax 
E-Mail

[email protected]

 

Web Site

http://www.barretomfg.com

 

 
 
 

Machine Identification Record 

 

Machine model number  

________________________ 

 
Machine serial number   

________________________ 

 
Engine manufacturer      

________________________ 

 
Engine model number    

________________________ 

 
Engine serial number     

________________________ 

 

Summary of Contents for 712MT
















Reviews: