1324D – 1624D Operator’s Manual
Revised 12/4/14
Page 2 of 10
LUBRICATION REQUIREMENTS
Grease per the following schedule:
a. Boom Pivot – Daily
b. Outboard Bearings – Daily
c. Wheel Hubs, 1 zerk for each hub – Monthly
d. Cylinder Pins (2) – Daily
e. Cylinder Rod End (thru hole in motor cover) – Daily
f. Sprocket Hub Bearing – Daily
g. Front Wheel Axle – Weekly
h. Chain Roller – Daily
SAFETY MESSAGES
General safety messages are listed in this Safety Messages section. Specific safety messages appear as appropriate
in this manual where a potential hazard may occur if procedures or instructions are not followed correctly and
completely.
SAFETY SYMBOL
This is the international safety alert symbol. This symbol is used in combination with a signal word and
written message to warn you of a potential for bodily injury or death.
A signal word "DANGER", "WARNING", or "CAUTION" is used with the safety alert symbol.
DANGER
: Imminent hazards, that if not avoided, will result in serious personal injury or death.
WARNING
: Potential hazards or unsafe practices, that if not avoided, could result in serious personal
injury or death.
CAUTION
: Potential hazards or unsafe practices, that if not avoided, could result in minor personal
injury, product damage, or property damage.
Safety decals with a signal word "DANGER", "WARNING", or "CAUTION" are affixed to the trencher near
specific hazards.
Read this manual and study ALL decals on the trencher before operating the trencher.
Go to
Discount-Equipment.com
to
order your parts
