18
It will be necessary to access the blade for inspection or replacement.
1. Remove wing nut and lift table up. (Figure 17)
2. Use a 18mm adjustable wrench and allen wrench to tighten or loosen the jam nut, right hand
thread. (Figure 19)
Diamond Blade Installation and Removal
Figure 18: Blade Arbor Blade,
Outer Flange, and Jam Nut
Figure 17: Lift Table
Figure 19: Changing the Blade
BD7CW
DIAMOND BLADE
NOTICE: Do not over tighten the jam nut! Blade flanges must always be installed with their con-
cave or recessed side facing the blade. (Figure 20)
Figure 20: Convex (recessed)
Side of the Blade Flange
7-inch Trim Saw Accessories
Item
Description
Part#
Dressing Stick
6" x 1" x 1"
999997
Dressing Stick
8" x 2" x 1"
164025
Splash Hood
•
169730
Rock Vise
•
169400
