Barracuda CloudGen Firewall
Barracuda NG Firewall F180 Revision A
3 / 5
either with a heart symbol or the term Status. It indicates the appliance’s operational state by
changing colors between green, orange, and red and by changing between blinking and steady
glowing. The table below shows the different meanings of the different glowing states.
Your appliance is equipped with a variety of LEDs and acoustic signals. The front panel of
the Barracuda NG Firewall F80 contains one power LED (blue), one disc LED (green), one status LED
(red), and 4 port LEDs. On the back panel, you can see one power button LED and various port LEDs.
Two acoustic signals indicate status of installation.
LED Color
Glowing State
Meaning
All LED Off
Off
Appliance is powered off, or installation has not initialized far
enough for LED control when installation is started.
Power LED -
BLUE
steady
Appliance is plugged in and is on.
Status LED - RED
Off
Power LED on and Status LED off: Box is running normally, or
Installation has finished successfully.
Steady
Appliance is halted and may be disconnected, or an error
occurred preventing the Barracuda NG Firewall from entering the
up state.
Blinking slowly
(1/s interval)
Normal installation, or appliance is either booting, shutting down,
or performing a system update.
Blinking fast
(4/s interval)
Error during installation, or appliance is in
mode.
Disc LED -
GREEN
Blinking
Appliance is accessing the internal storage.
Port LEDs (front)
- GREEN
Blinking
Port in use (Data transfer).
Port LEDs (back)
- GREEN
Left blinking
Port in use (Data transfer) – Yellow (10/100 Mbps).
Right steady
Port is on.
Acoustic Signal Frequency
Meaning
Beep
1 time
(.)
Appliance is booting.
Beep
3 times
(...)
Installation was completed successfully; appliance is halted for
reboot. After reboot, one beep will again indicate booting.
Beep
3 times long
(_ _ _)
Error during installation
LED and acoustic signals may vary between different appliance models.
