Barracuda CloudGen Firewall
3 / 7
ROHS compliant
Yes
Power & Efficiency
Power supply
Dual, with two external PSU adapters
Power supply type
External
External power supply is not included in delivery of the appliance and needs to be ordered
individually.
Power connector
Phoenix contact
6-pin connector w/ lock
Power type [AC/DC]
DC
Input rating [Volts]
12 - 36
Wattage / max. power draw [W]
60
Max. power draw (@ 24Vdc) [A]
2
Max. heat dissipation [W]
60
IP Code
• IP30 - With a 6-pin phoenix connector used.
• IP20 - With a 2-pin phoenix connector used.
The hardware specifications list was valid at the time this manual was published. The listed
components are subject to change at any time, as Barracuda Networks may change hardware
components due to technological advancements. Therefore, the list may not reflect the current
hardware configuration of the Barracuda appliance it was delivered with.
Dual Power Supply Connector and P-Fail relay (6-PIN connector)
F183R appliances are equipped with a 6-pin connector, for connecting two external power supplies
and an alarm device in case of failure. The appliance can run with one or two external power supplies.
As F183R comes with dual power and P-fail relay features, the P-Fail relay will have the signaling
device triggered as the power supply fails. The relay circuit is set to be open by default and closed
when either or neither of the powers is detected; the closed (or short) circuit then allows the alarm
device to be activated. Please note that the alarm device needs its own power circuit.
PWR1
PWR2
Circuit Status Alarm Device
Detected
Detected
Open (Normal)
Off
Not Detected
Detected
Closed
Activated
Detected
Not Detected
Closed
Activated
Not Detected Not Detected
Closed
Activated
